.10
1 Iron Screw-Box, French, 3/8". 1.80
4 Flat Bastard Files, K. & F., 8", handled. .60
4 Half-Round Files, K. & F., 8", handled. .72
4 Rat-tail Files, K. & F., 8", handled. .44
4 Files, 6", slim taper. .36
2 Auger-Bit-Files. .25
1 File-Card, No. 1. .14
1 Empire Tool-Grinder. 2.80
1 Grindstone, No. 11, (iron frame and stone). 15.00
2 India Oilstones, No. 29 (medium), in iron box. 1.34
1 Soft Arkansas Oil Slipstone, No. 6. .18
2 Copperized Steel Oilers, 14A, 1/2 pint. .46
6 Disston's Sliding T Bevels, No. 3, 6". 1.38
1 Stanley Miter-Square, No. 16, 10". .60
1 Sargent Steel Square, No. 2. .60
2 Pairs Dividers, Starrett's winged, No. 92, 8". 1.50
3 Scratch-Awls, Collier's, 4". .33
1 Pair Trammel-Points, No. 1. .74
1 Try-Square, No. 5-1/2, 12", hardened blade. .52
1 Mortise-Gage, No. 77. .55
1 Cutting-Gage, No. 70. .17
3 Each Firmer-Chisels, Buck Bros.' No. 2, handled and sharpened;
1/16", 1/8", 3/16", 3/8", 3/4", 1-1/2". 4.42
3 Each outside-Bevel Gouges, Buck Bros.' Firmer, No. 8 handled
and sharpened: 1/4", 1/2", 3/4", 1". 3.55
3 Addis' Carving-Tools, round maple handles, No. 11, 5/32". .96
3 Addis' Veining-Tools, round maple handles, No. 11, 1/16". .96
3 Inside-Bevel Gouges, regular sweep, No. 10, 3/4". 1.29
6 Barber's Nickel-Plated Braces, No. 14, 6" sweep. 5.25
1 Barber's Ratchet-Brace, No. 31, 12" sweep. 1.62
3 Each German Gimlet-Bits, 2/32", 3/32", 4/32", 5/32", 6/32". 1.00
3 Each Russell Jennings' Auger-Bits, 3/16", 4/16", 5/16", 6/16",
7/16", 8/16". 4.18
2 Each