to maintain good order in the shop, an almost
indispensable part of the equipment is a set of lockers for holding
the unfinished work of pupils. An inexpensive outfit may consist
simply of sets of shelves, say 5" apart, 12" deep, and 18" long, Fig.
241. Ordinary spring-roller curtains may be hung in front of each set
of shelves to conceal and protect the contents. Such a case
should cost at the rate of about 40c. for each compartment. A more
substantial and more convenient case, shown in Fig. 242, consists
of compartments each 9-1/2" high, 6" wide, and 18" deep. These
proportions may be changed to suit varying conditions. In front of
each tier of 12 compartments is a flap door opening downward. Such a
case built of yellow pine (paneled) may cost at the rate of $1.00 per
compartment.
[Illustration: Fig. 243. Gluing and Staining Bench Covered with Zinc.]
There should, of course, be a separate compartment for each pupil
using the shop. Where possible, there should be a special table for
staining and gluing. Where strict economy must be practiced, a good
sized kitchen table covered with oilcloth answers every purpose. A
better equipment would include a well-built bench, such as that shown
in Fig. 243, the top and back of which are covered with zinc.
Where no staining-table is possible, temporary coverings of oilcloth
may be provided to lay over any bench which is convenient for the
purpose.
[Illustration: Fig. 244. Shellac Utensils.]
_Care of brushes and materials used in finishing wood._ Shellac should
be kept in glass or pottery or aluminum receptacles but not in any
metal like tin, which darkens it. A good plan is to have a bottle for
fresh, untouched shellac, a wide-mouthed jar for that which has been
diluted and used, and an enameled cup for use. There should also be
a special brush, Fig. 244. At the time of using, first see that the
brush is soft and pliable. If it is stiff, it can be soaked quickly
and softened in a little alcohol in the cup. This alcohol may then be
poured into the jar and mixed in by shaking. Then pour out a little
from the jar into the cup, and if it is too thin, thicken with some
fresh shellac. After using, pour back the residue into the jar,
carefully wiping the brush on the edge of the jar; and if it is not to
be used again for some time, rinse it in a little alcohol, which may
also be poured into the jar, which should then be covered. What little
shellac remains in the brush and cu
|