27006
[2] Ford Negative Post Builder 27224
2 No. 8 Post Builder (13/16" diameter straight post) 27225
Style "B" Prest-O-Lite Torch, with six feet of red gum tubing A-3116
Automatic Reducing Valve A-427
COMPLETE TYPE "N" OUTFIT including all parts above 27116

* The CLN and KPN Spacer block, bent Latch and Bed Plate are special
parts used only in the Arbor Press when it is especially assembled to
lock CLN or KPN posts.

[1] The Re-Builder is used to build up posts before attempting to lock
on the cover. The replacing of the metal cut away from the original
diameter of the post when the jar cover was removed is necessary to
the correct operation of the Peening Tool.

[2] The Builder is used to build up posts, after they have been locked
and shaped by the Peening Tool, to a size large enough to take some
special terminal. For example, the Ford Positive Post Builder is used
in building up posts, locked by the Large Peening Tool, to the proper
size to take the Ford positive terminal.

The Automatic Reducing Valve delivers the gas from the P-O-L tank at a
uniform pressure of 3 pounds per square inch, whether the tank is
full, half empty, or nearly empty, and regardless of the volume of gas
used. The volume or flow of gas is regulated by the key.

The style "B" torch mixes the pure acetylene from the gas tank with
the proper amount of air necessary to an efficient heating flame.

The heating flame is conducted or delivered to the Peening Tool by the
short length of brass tubing known as the Torch-Holder, over which the
"B" Torch is pressed by hand in completing the assembly.

[Fig. 248 Special Prest-O-Lite Peening Press]

Both the "B" Torch and the Automatic Reducing Valve are absolutely
essential to the use of the Prest-O-Lite gas tank for heating the
Peening Tool.

Prest-O-Lite gas tanks, style A, B, C, or E, may be used in connection
with the Automatic Reducing Valve, as shown in Fig. 248. To use a
welding size gas tank it is necessary to insert a "W to A" Adapter
between the tank and Reducing Valve. This Adapter can be purchased
from the Prest-O-Lite Co., Inc.

The Arbor Press when received by the Service Station is fully
assembled, ready for mounting and operation with all P-O-L locked post
types except CLN and KPN.

Mount the Press in a vertical position (Fi