nations deposited with the
Board of Trade.

(3) That the standard of electrical resistance should be denominated
the ohm, and should have the value 1,000,000,000 in terms of the
centimeter and second.

(4) That the resistance offered to an unvarying electric current by a
column of mercury of a constant cross sectional area of 1 square
millimeter, and of a length of 106.3 centimeters at the temperature of
melting ice may be adopted as 1 ohm.

(5) That the value of the standard of resistance constructed by a
committee of the British Association for the Advancement of Science in
the years 1863 and 1864, and known as the British Association unit,
may be taken as 0.9866 of the ohm.

(6) That a material standard, constructed in solid metal, and verified
by comparison with the British Association unit, should be adopted as
the standard ohm.

(7) That for the purpose of replacing the standard, if lost,
destroyed, or damaged, and for ordinary use, a limited number of
copies should be constructed, which should be periodically compared
with the standard ohm and with the British Association unit.

(8) That resistances constructed in solid metal should be adopted as
Board of Trade standards for multiples and sub-multiples of the ohm.

(9) That the standard of electrical current should be denominated the
ampere, and should have the value one-tenth (0.1) in terms of the
centimeter, gramme, and second.

(10) That an unvarying current which, when passed through a solution
of nitrate of silver in water, in accordance with the specification
attached to this report, deposits silver at the rate of 0.001118 of a
gramme per second, may be taken as a current of 1 ampere.

(11) That an alternating current of 1 ampere shall mean a current such
that the square root of the time-average of the square of its strength
at each instant in amperes is unity.

(12) That instruments constructed on the principle of the balance, in
which, by the proper disposition of the conductors, forces of
attraction and repulsion are produced, which depend upon the amount of
current passing, and are balanced by known weights, should be adopted
as the Board of Trade standards for the measurement of current,
whether unvarying or alternating.

(13) That the standard of electrical pressure should be denominated
the volt, being the pressure which, if steadily applied to a conductor
whose resistance is 1 ohm, will produce a current of 1 ampere.

(14) That the e