FREE BOOKS

Author's List




PREV.   NEXT  
|<   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   101   102   103   104   105   106  
107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   129   130   131   >>   >|  
| by carbonate of soda. Use | | | | of best hydrocarbon oils. | | | | | | Organic Matter | Corrosion | Filter. Use of coagulent. | | | | | | Organic Matter | Priming | Settling tanks. Filter in | | (Sewage) | | connection with coagulent. | | | | | | Carbonate of Soda in | Priming | Barium carbonate. New feed | | large quantities | | supply. If from treatment, | | | | change. | +-----------------------+--------------+-----------------------------+ It is evident that the whole subject of boiler feed waters and their treatment is one for the chemist rather than for the engineer. A brief outline of the difficulties that may be experienced from the use of poor feed water and a suggestion as to a method of overcoming certain of these difficulties is all that will be attempted here. Such a brief outline of the subject, however, will indicate the necessity for a chemical analysis of any water before a treatment is tried and the necessity of adapting the treatment in each case to the nature of the difficulties that may be experienced. Table 14 gives a list of impurities which may be found in boiler feed water, grouped according to their effect on boiler operation and giving the customary method used for overcoming difficulty to which they lead. Scale--Scale is formed on boiler heating surfaces by the depositing of impurities in the feed water in the form of a more or less hard adherent crust. Such deposits are due to the fact that water loses its soluble power at high temperatures or because the concentration becomes so high, due to evaporation, that the impurities crystallize and adhere to the boiler surfaces. The opportunity for formation of scale in a boiler will be apparent when it is realized that during a month's operation of a 100 horse-power boiler, 300 pounds of solid matter may be deposited from water containing only 7 grains per gallon, while some spring and well waters contain sufficient to cause a deposit of as high as 2000 pounds. The salts usually responsible for such incrustation are the carbonates and sulphates of lime and magnesia, and boiler feed
PREV.   NEXT  
|<   82   83   84   85   86   87   88   89   90   91   92   93   94   95   96   97   98   99   100   101   102   103   104   105   106  
107   108   109   110   111   112   113   114   115   116   117   118   119   120   121   122   123   124   125   126   127   128   129   130   131   >>   >|  



Top keywords:

boiler

 
treatment
 

impurities

 

difficulties

 

overcoming

 

necessity

 

experienced

 

outline

 

Matter

 

Organic


carbonate

 

surfaces

 

operation

 

pounds

 

method

 

waters

 

Filter

 

coagulent

 

Priming

 

subject


soluble

 

gallon

 

evaporation

 

crystallize

 

concentration

 

temperatures

 

adherent

 

sufficient

 

deposits

 

adhere


spring

 

carbonates

 
sulphates
 
incrustation
 

deposited

 

matter

 

deposit

 

apparent

 

responsible

 

opportunity


formation

 

grains

 

magnesia

 

realized

 

evident

 

change

 

supply

 

chemist

 

suggestion

 
engineer