r.
2. TO ATTACH THE FIRST-AID POUCH.--Attach the pouch under the second
pocket of the right section of the belt by inserting one hook of the
double-hook attachment in the eyelet, from the inside of the belt;
pinch the base of the pocket, bringing eyelets close together, and
insert the other hook in the same manner in the adjoining eyelet.
Place the first-aid packet in the pouch and secure the cover.
3. TO ATTACH THE CANTEEN COVER.--Attach the canteen cover to the belt
under the rear pocket of the right section in the same manner as the
first-aid pouch.
Place the canteen and cup (assembled) in the cover and secure the
flaps.
4. TO ATTACH THE PACK CARRIER TO THE HAVERSACK.--Spread the haversack
on the ground, inner side down, outer flap to the front (Fig. 4);
place the buttonholed edge of the pack carrier on the buttonholed edge
of the haversack, lettered side of carrier up; buttonholes of carrier
superimposed upon the corresponding ones of the haversack; lace the
carrier to the haversack by passing the ends of the coupling strap
down through the corresponding buttonholes of the carrier and
haversack nearest the center of the carrier, bringing the ends up
through the next buttonholes and continuing to the right and left,
respectively, to the sides.
5. TO ATTACH THE CARTRIDGE BELT TO THE HAVERSACK.--Place the haversack
and pack carrier (assembled) on the ground, inner side down (Fig. 5);
place the cartridge belt, pockets down, tops to the front, along the
junction of the haversack and carrier; insert hook on rear of belt
suspender in the center eyelet of the adjusting strap, so that the end
of the hook will be on the outside of the belt; insert hooks on ends
of front belt suspenders in the eyelets between the second and third
pockets from the outer ends of the belt, so that the end of the hooks
will be on the outside of the belt.
6. TO ATTACH THE BAYONET SCABBARD TO THE HAVERSACK.--Attach the
scabbard by passing its lower end through the loop provided on the
side of the haversack body, then engage the double-hook attachment in
the eyelets on the outer flap on the haversack, inserting the hooks
from the inside.
Place the bayonet in the scabbard.
7. TO ATTACH THE INTRENCHING TOOL CARRIER TO THE HAVERSACK.--Fold the
outer flap of the haversack over so that the meat-can pouch is
uppermost; pass the intrenching tool carrier underneath the meat-can
pouch and engage the double-hook attachment in the eyelet
|