The Project Gutenberg EBook of A Course In Wood Turning
by Archie S. Milton and Otto K. Wohlers
This eBook is for the use of anyone anywhere at no cost and with
almost no restrictions whatsoever. You may copy it, give it away or
re-use it under the terms of the Project Gutenberg License included
with this eBook or online at www.gutenberg.net
Title: A Course In Wood Turning
Author: Archie S. Milton and Otto K. Wohlers
Release Date: March 25, 2005 [EBook #15460]
Language: English
Character set encoding: ASCII
*** START OF THIS PROJECT GUTENBERG EBOOK A COURSE IN WOOD TURNING ***
Produced by Jason Isbell and the PG Online Distributed Proofreading Team
[Transcribers note: Mis-spelled words in the original left as is.
Below is a list of all known mis-spelled words kept from the original:
Table Of Contents - Classification of Plates
bowels - should be bowls
Chapter II - SPEED OF THE LATHE
centrificial - should be centrifugal
Chapter IX - METHODS OF FASTENING STOCK
epecially - should be especially
Chapter XI - SPIRAL TURNING
modelling - should be modeling
Chapter XI - PLATES B-V--2-b, b'
midde - should be middle]
A COURSE IN WOOD TURNING
By ARCHIE S. MILTON
OTTO K. WOHLERS
[Illustration: BRUCE MILWAUKEE (Publishers Stamp)]
THE BRUCE PUBLISHING COMPANY
MILWAUKEE, WISCONSIN
Copyright 1919
Archie S. Milton
Otto K. Wohlers
PREFACE
This book is the outgrowth of problems given to high school pupils by
the writers, and has been compiled in logical sequence. Stress is laid
upon the proper use of tools, and the problems are presented in such a
way that each exercise, or project, depends somewhat on the one
preceding. It is not the idea of the writers that all problems shown
should be made, but that the instructor select only such as will give
the pupils enough preliminary work in the use of the tools to prepare
them for other models following.
The related matter on the care of the lathe and tools, the grinding of
chisels, the polishing of projects, and the specific directions and
cautions for working out the various exercises and projects with the
drawings, make the book not only valuable for reference, but also as a
class text to be studied in connection with the making of projects. The
drawings show exact dimensions and are tabulated in the upper right-hand
corner in such a way that they may be used in a filing case if desired
|