FREE BOOKS

Author's List




PREV.   NEXT  
|<   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25  
26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   >>  
The Project Gutenberg EBook of A Course In Wood Turning by Archie S. Milton and Otto K. Wohlers This eBook is for the use of anyone anywhere at no cost and with almost no restrictions whatsoever. You may copy it, give it away or re-use it under the terms of the Project Gutenberg License included with this eBook or online at www.gutenberg.net Title: A Course In Wood Turning Author: Archie S. Milton and Otto K. Wohlers Release Date: March 25, 2005 [EBook #15460] Language: English Character set encoding: ASCII *** START OF THIS PROJECT GUTENBERG EBOOK A COURSE IN WOOD TURNING *** Produced by Jason Isbell and the PG Online Distributed Proofreading Team [Transcribers note: Mis-spelled words in the original left as is. Below is a list of all known mis-spelled words kept from the original: Table Of Contents - Classification of Plates bowels - should be bowls Chapter II - SPEED OF THE LATHE centrificial - should be centrifugal Chapter IX - METHODS OF FASTENING STOCK epecially - should be especially Chapter XI - SPIRAL TURNING modelling - should be modeling Chapter XI - PLATES B-V--2-b, b' midde - should be middle] A COURSE IN WOOD TURNING By ARCHIE S. MILTON OTTO K. WOHLERS [Illustration: BRUCE MILWAUKEE (Publishers Stamp)] THE BRUCE PUBLISHING COMPANY MILWAUKEE, WISCONSIN Copyright 1919 Archie S. Milton Otto K. Wohlers PREFACE This book is the outgrowth of problems given to high school pupils by the writers, and has been compiled in logical sequence. Stress is laid upon the proper use of tools, and the problems are presented in such a way that each exercise, or project, depends somewhat on the one preceding. It is not the idea of the writers that all problems shown should be made, but that the instructor select only such as will give the pupils enough preliminary work in the use of the tools to prepare them for other models following. The related matter on the care of the lathe and tools, the grinding of chisels, the polishing of projects, and the specific directions and cautions for working out the various exercises and projects with the drawings, make the book not only valuable for reference, but also as a class text to be studied in connection with the making of projects. The drawings show exact dimensions and are tabulated in the upper right-hand corner in such a way that they may be used in a filing case if desired
PREV.   NEXT  
|<   1   2   3   4   5   6   7   8   9   10   11   12   13   14   15   16   17   18   19   20   21   22   23   24   25  
26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   >>  



Top keywords:

Chapter

 

projects

 

TURNING

 

Archie

 

problems

 

Milton

 

Wohlers

 

original

 
spelled
 
MILWAUKEE

writers

 
drawings
 

pupils

 

COURSE

 

Turning

 
Project
 

Gutenberg

 
Course
 

exercise

 

PREFACE


filing

 
project
 

depends

 
preceding
 

Copyright

 

corner

 
desired
 

compiled

 

logical

 

outgrowth


school
 

sequence

 
Stress
 

proper

 

presented

 

grinding

 

matter

 

WISCONSIN

 

related

 

studied


chisels

 

polishing

 
exercises
 
valuable
 

working

 

cautions

 

reference

 

specific

 

directions

 

models