son. The dry way, too, in which he
suggests that conclusions based upon actual results from existing railways
are of more value than deductions from supposed conditions upon imaginary
roads, is exceedingly entertaining. The result was the adoption of the
gauge recommended by him, namely, five feet. Those who remember the "Battle
of the Gauges," and who know how much expense and trouble the wide gauge
has since caused, will appreciate the stand taken thus early by Major
Whistler; and this was but one among many cases which might be mentioned to
show how comprehensive and far-reaching was his mind.
The roadbed of the St. Petersburg and Moscow Railway was made 30 feet wide
on top, for a double track of 5 foot gauge, with a gravel ballasting two
feet deep. The bridges were of wood, of the Howe pattern, no spans being
over 200 feet in length. The stations at each end, and the station and
engine houses along the line, were on a plan uniform throughout, and of the
most ample accommodation. Fuel and water stations were placed at suitable
points, and engine houses were provided 50 miles apart, built of the most
substantial masonry, circular in form, 180 feet in diameter, surmounted by
a dome, and having stalls for 22 engines each. Repair shops were attached
to every engine house, furnished with every tool or implement that the
wants of the road could suggest.
The equipment of rolling stock and fixed machinery for the shops was
furnished by the American firm of Winans, Harrison & Eastwick, who from
previous acquaintance were known by Major Whistler to be skillful,
energetic, and reliable. Much diplomacy was needed to procure the large
money advances for this part of the work, the whole Winans contract
amounting to nearly five millions of dollars; but the assurance of Major
Whistler was a sufficient guarantee against disappointment or failure.
In 1843 the plans for the work were all complete, and in 1844 the various
operations along the line were well under way, and proceeding according to
the well arranged programme. In 1845 the work had progressed so far that
the construction of the rolling stock was commenced. The locomotives were
of two classes, freight and passenger. The engines of each class were made
throughout from the same patterns, so that any part of one engine would fit
the same position on any other. The passenger engines had two pairs of
driving wheels, coupled, 6 feet in diameter, and a four wheeled truck
simila
|