FREE BOOKS

Author's List




PREV.   NEXT  
|<   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45  
46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   >>   >|  
rving will be spoiled. Then it is embodied with polish again, and one coat of glaze applied with the greatest care. A few hours should be allowed to harden, and then finished off with a rubber slightly damped with thin polish. This is an expensive method, but it will pay in appearance for all the time bestowed. For the best class of cabinet and pianoforte work in amboyna or burr-walnut it is advisable not to use linseed-oil on the sole of the rubber when polishing, but the best hog's lard; the reason for this is that these veneers being so extremely thin and porous the oil will quickly penetrate through to the groundwork, softening the glue, and causing the veneers to rise in a number of small blisters. Of course, this is not always the case, but the use of lard instead of oil will be found a good preventative. Lard is also used on the above class of work when it is desirable to preserve the colour of the wood in its natural state. The following method is employed for the best work: Immediately on receiving the job from the cabinet-maker, a good coating of thin, clean glue should be applied with a sponge or brush; this is allowed to dry, and thoroughly harden; it is then cleaned off, using the scraper and glass-paper, cutting it down to the wood. The bodying-in with white polish is the next process, the usual sinking period being allowed; it is again cleaned off, but the scraper this time should not quite reach the wood. Then embody again, and treat in a like manner. In getting up the permanent body, commence with a slight embodying; let this stand, and when the sinking period is over rub it down with a felt rubber and powdered pumice-stone; continue this several times, till the surface presents a satisfactory appearance, and the job is ready for the spiriting process. By this means the wood will retain its natural colour, and a beautiful transparent polish will result, and remain for a number of years. This also is an expensive process, but the result cannot be obtained in any other way. =Spiriting-off.=--Most polishers affirm that if an interval of at least a couple of hours elapse between the final embodying and the spiriting-off the brilliancy of the polish will be improved, and remain harder and more durable. The spirit is applied in exactly the same way as the polish, and the same rubber can be used, but it should be covered with more than one fold of the soft linen rag; care should be taken not to make i
PREV.   NEXT  
|<   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38   39   40   41   42   43   44   45  
46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   64   65   66   67   68   69   70   >>   >|  



Top keywords:

polish

 

rubber

 

process

 

applied

 
allowed
 

number

 

embodying

 

remain

 

colour

 

cleaned


veneers

 

natural

 

scraper

 
result
 
sinking
 
cabinet
 

harden

 

spiriting

 

expensive

 

method


period

 

appearance

 

continue

 
surface
 

presents

 

slight

 
permanent
 
manner
 

commence

 
satisfactory

powdered
 

pumice

 
durable
 

spirit

 
harder
 

improved

 

brilliancy

 
covered
 

elapse

 

couple


obtained

 
transparent
 

beautiful

 

retain

 
interval
 

affirm

 

Spiriting

 

embody

 
polishers
 

reason