FREE BOOKS

Author's List




PREV.   NEXT  
|<   268   269   270   271   272   273   274   275   276   277   278   279   280   281   282   283   284   285   286   287   288   289   290   291   292  
293   294   295   296   297   298   299   300   301   302   303   304   305   306   307   308   309   310   311   312   313   314   315   316   317   >>   >|  
[Illustration: How the Joint Is Cut] wood, the illustration, of course, shows only two sides, the other two are identical. The joint is separable and each part is solid and of one piece. In making, take two pieces of wood, preferably of contrasting colors, such as cherry and walnut or mahogany and boxwood, about 1-1/2 in. square and of any length desired. Cut the dovetail on one end of each stick as shown in Fig. 2, drive together and then plane off the triangular corners marked A. The end of each piece after the dovetails are cut appear as shown in Fig. 3, the lines marking the path of the dovetail through the stick. ** Radiator Water [236] Pure rain water is the best to use in a cooling system of an automobile engine, as it is free from the mineral substances which are deposited in the radiator, piping and jackets by hard water. ** Springboard for Swimmers [237] A good springboard adds much to the fun of swimming. The boards are generally made so that the plank will bend, being dressed down thin at one end and fastened. The thinness of the plank, or an insecure fastening, causes many a plank to snap in two or come loose from its fastenings in a short time. The accompanying sketch shows the method of constructing a springboard that does not depend upon the bending of the wood for its spring. It is made of a plank, 2 in. thick and from 14 to 16 ft. long, one end of which is secured with a hinge arrangement having a U-shaped rod whose ends are held with nuts. On each edge of the board, at the lower end, are fastened two pieces of strap iron, each about 1 ft. long and with the lower ends drilled to fit the horizontal of the U-shaped rod. Secure a pair of light buggy springs from a discarded rig and attach them to the ends of a square bar of iron having a length equal to the width of the plank. Fasten this to the plank with bolts, as shown in the sketch. Should the springs be too high they can be moved forward. --Contributed by John Blake, Franklin, Mass. [Illustration: Buggy Springs Used beneath the Board] ** Taking Button from a Child's Nostril [237] A three-year-old child snuffed a button up its nostril and the mother, in an attempt to remove it, had caused the button to be pushed farther up the channel. Doctors probed for the button without success. The distracted mother happened to think of snuff, and, as there was some at hand, took a pinch of snuff between the thumb and foref
PREV.   NEXT  
|<   268   269   270   271   272   273   274   275   276   277   278   279   280   281   282   283   284   285   286   287   288   289   290   291   292  
293   294   295   296   297   298   299   300   301   302   303   304   305   306   307   308   309   310   311   312   313   314   315   316   317   >>   >|  



Top keywords:

button

 

mother

 
dovetail
 

length

 

springboard

 
square
 

Illustration

 

sketch

 

springs

 

pieces


fastened

 

shaped

 
discarded
 

Fasten

 
attach
 
arrangement
 
secured
 

Secure

 

horizontal

 

drilled


channel

 

farther

 
Doctors
 

probed

 

pushed

 

caused

 
nostril
 

snuffed

 

attempt

 

remove


success

 

distracted

 

happened

 

Contributed

 

forward

 

Franklin

 

Should

 
spring
 

Nostril

 

Button


Taking

 

Springs

 
beneath
 
triangular
 

corners

 

marked

 

desired

 
dovetails
 

Radiator

 

marking