strongly built for service and will last indefinitely.

_SPECIFICATIONS._

Bellows Draw, 5 x 7, 14 in.; 6-1/2 x 8-1/2, 15-1/2 in.; 8 x 10, 17 in.
Weight, 5 x 7, 4-3/4 lbs.; 6-1/2 x 8-1/2, 6 lbs.; 8 x 10, 6-3/4 lbs. Size
of Lens Board, 5 x 7, 3-3/4 x 6-3/8 in.; 6-1/2 x 8-1/2, 4-1/2 x 6-1/2 in.;
8 x 10, 5 x 6 in. Carrying Case, square style canvas.

_PRICES._

5 x 7 6-1/2 x 8-1/2 8 x 10

R. O. C. View with Case and Holder $12.00 $13.00 $14.00
Extra Carrying Case, Regular 1.75 2.00 2.25

EASTMAN VIEW No. 1

IMPROVED MODEL OF EMPIRE STATE

[Illustration]

For years there has been no radical change in View Cameras. The Empire
State camera had seemed to meet all requirements, and it certainly gave
good value and satisfaction.

However we started an investigation of the View Camera situation some time
ago, and it was found that improvements could be made, and by the
perfection of our factory organization and the running through of large
lots, a camera fully equal to the old Empire State, from the standpoint of
service and efficiency, could be supplied to advantage.

As a result we now offer the Eastman View No. 1, an Improved Model of
Empire State, and anyone who is in the market for a substantial, reliable
view camera at low cost, will find this of exceptional value for the
money.

The appearance of this camera is quite novel. It is finished in mission
style with metal parts oxidized, and black bellows.

It has no complications, but is built for practical service, and its
various adjustments are such as to work conveniently and easily.

It has double extensions and both front and back are actuated by rack and
pinion, so that the camera may be focused from either end, and the back
can be racked up as close to the front as desired. This provides for the
use of lenses of the widest angle. The camera has rising and falling
front, actuated by rack and pinion, and this can be locked solidly at any
point by merely pushing in the pinion. The front board is removable and is
large enough to accomodate any lens.

Both horizontal and vertical swings are provided, and the back is
reversible and furnished with a vertical cut-off board, so that two
negatives may be made on one plate, if desired.

A strap handle and plumb level are supplied and an automatic bellows
support which prevents sagging of the bellows at any time.