ine, the purpose of which is to stamp on the cloths the
lengths of the same at regular distances. It is very desirable that drapers
should have some simple means of discovering at a glance what amount of
material they have in stock without the necessity of unrolling their cloth
to measure it, and this machine seems to perfectly meet the demands of the
case. The arrangement for effecting the printing and inking is shown in our
engraving at A. It is contained within a small disk, which can be moved at
will, so that it can be adapted to various widths of cloth or other
material. A measuring roller runs beside the printing disk, and on this is
stamped the required figures by a simple contrivance at the desired
distances, say every five yards. The types are linked together into a
roller chain which is carried by the disk, A, and they ink themselves
automatically from a flannel pad. The machine works in this way: The end of
the piece to be measured is brought down until it touches the surface of
the table, the marker is turned to zero, and also the finger of the dial on
the end of the measuring roller. The machine is then started, and the
lengths are printed at the required distances until it becomes necessary to
cut out the first piecing or joint in the fabric. The dial registers the
total length of the piece.
* * * * *
ENDLESS ROPE HAULAGE.
In the North of England Report, the endless rope systems are classified as
No. 1 and No 2 systems. No. 1, which has the rope under the tubs, is said
to be in operation in the Midland counties. To give motion to the rope a
single wheel is used, and friction for driving the rope is supplied either
by clip pulleys or by taking the rope over several wheels. The diagram
shows an arrangement for a tightening arrangement. One driving wheel is
used, says _The Colliery Guardian_, and the rope is kept constantly tight
by passing it round a pulley fixed upon a tram to which a heavy weight is
attached. Either one or two lines of rails are used. When a single line is
adopted the rope works backward and forward, only one part being on the
wagon way and the other running by the side of the way. When two lines are
used the ropes move always in one direction, the full tubs coming out on
one line and the empties going in on the other. The rope passes under the
tubs, and the connection is made by means of a clamp or by sockets in the
rope, to which the set is atta
|