is a desk necessity and the cleanliness of one depends
on keeping it closed when it is not in use. The opening and
closing of a pad requires both hands and consequently the closing
of a pad is often neglected in order to avoid soiling the fingers.
This trouble can be avoided if the pad is fitted with a small
handle as shown in the sketch. Take the ordinary pad and work the
hinge until it opens freely.
[Illustration: Handle on Cover]
If necessary apply a little oil and spread the flanges of the
cover slightly.
Saw off the top of a common wood clothespin just above the slot,
saving all the solid part. Fasten this to the cover near the back
side in an upright position with a screw. A tap on the front side
of the pin will turn it over backward until the head rests on the
desk thus bringing the cover up in the upright position. When
through using the pad, a slight tap on the back side of the cover
will turn it down in place.
--Contributed by H. L. Crockett, Gloversville, N. Y.
** Concrete Kennel [23]
The kennel shown in the illustration is large enough for the usual
size of dog. It is cleanly, healthful and more ornamental than the
average kennel.
[Illustration: Finished Kennel]
This mission style would be in keeping with the now popular
mission and semi-mission style home, and, with slight
modifications, it could be made to conform with the ever beautiful
colonial home. It is not difficult to
[Illustration: Concrete Forms]
build and will keep in good shape for many years. The dimensions
and the manner of making the forms for the concrete, and the
location for the bolts to hold the plate and rafters, are shown in
the diagram.
--Contributed by Edith E. Lane, El Paso, Texas.
** Nutshell Photograph Novelty [24]
Split an English walnut in the center, remove the contents, and
scrape out the rough parts. Make an oval
[Illustration: Photograph in the Shell]
opening by filing or grinding. If a file is used, it should be new
and sharp. After this is done, take a small half round file and
smooth the edges into shape and good form.
The photograph print should be quite small--less than 1/2 in.
across the face. Trim the print to a size a little larger than the
opening in the shell, and secure it in place with glue or paste.
It may be well to fill the shell with cotton. Mount the shell on a
small card with glue, or if desired, a mount of different shape
can be made of burnt woodwork.
--Contribu
|