ods 5-1/2 in. wide and four strips 10 in. wide. Sew
them end to end and turn down one edge to a depth of 1 in. and
gather it at that point, also the lower edge when necessary. Sew
on to the covered cardboards. Fasten them to the sides of the tray
and basket with the smallest upholsterers' tacks. The product of
your labor will be a very neat and useful piece of furniture.
--Contributed by Stanley H. Packard, Boston, Mass.

** A Window Display [22]

A novel and attractive aeroplane window display can be easily made
in the following manner: Each aeroplane is cut from folded paper,
as shown in the sketch, and the wings bent out on the dotted
lines. The folded part in the center is pasted together. Each
aeroplane is fastened with a small thread from the point A as
shown. A figure of an airman can be pasted to each aeroplane. One
or more of the aeroplanes can be fastened in the blast of an
electric fan and kept in flight the same as a kite. The fan can be
concealed to make the display more real. When making the display,
have the background of such

[Illustration: Paper Aeroplanes in Draft]

a color as to conceal the small threads holding the aeroplanes.
--Contributed by Frederick Hennighausen, Baltimore, Md.

** How to Make a Flint Arrowhead [23]

If you live where flints abound, possess the requisite patience
and the knack of making things, you can, with the crudest of tools
and a little practice, chip out as good arrowheads as any painted
savage that ever drew a bow.

Select a piece of straight-grained flint as near the desired shape
as possible. It may be both longer and wider than the finished
arrow but it should not be any thicker. The side, edge and end
views of a suitable fragment are shown in Fig. 1. Hold the piece
with one edge or end resting on a block of wood and strike the
upper edge lightly with a hammer, a small boulder or anything that
comes handy until the piece assumes the shape shown in Fig. 2.

[Illustration: Fig.2 Fig.3 The Stone Chipped into Shape]

The characteristic notches shown in the completed arrow, Fig. 3,
are chipped out by striking the piece lightly at the required
points with the edge of an old hatchet or a heavy flint held at
right angles to the edge of the arrow. These heads can be made so
that they cannot be distinguished from the real Indian arrowheads.
--Contributed by B. Orlando Taylor, Cross Timbers, Mo.

** An Opening Handle for a Stamp Pad [23]

A stamp pad