FREE BOOKS

Author's List




PREV.   NEXT  
|<   49   50   51   52   53   54   55   56   57   58   59   >>  
-+-------+-------+-------/ | | Passaic. | | | | | | / | +------------------+-------+-------+-------+-------+-------+-------/ | | Governors Island.| | | | | | / +--+------------------+-------+-------+-------+-------+-------+-------/ | Stake Boat. | | | | | | / +---------------------+-------+-------+-------+-------+-------+-------/ | Dry Dock. | | | | | | / +---------------------+-------+-------+-------+-------+-------+-------/ | | / | Extra Pins. | Empty. White Pins not in use placed here. / | | / +---------------------+-----------------------------------------------/ The scows were all taken from the general service about the harbor; some of them were practically new, while others had seen much service. They were of two general types, truss-framed or bulkhead-framed; all were flat-bottomed, with a rake of about 45 deg. at bow and stern. The truss-framed scows were built with a cross-truss every 10 to 15 ft., on which rested, fore and aft, two classes of beams, main and intermediate. The main beams were built of timbers ranging from 10 by 10 in. to 14 by 14 in., were scarfed at the joints, and trussed with the bottom logs. The intermediate beams were of timbers varying from 6 by 6 in. to 10 by 12 in., had butt joints, and were dapped at the cross-trusses to give a convex surface to the deck, which was built of 3-in. and 4-in. plank, from 8 to 12 in. in width, running athwartship. The sides of the scows of this class were spiked and bolted to trusses similar to those running under the main beams. The bulkheaded boats had both sides and two longitudinal bulkheads placed so as to divide the scow into three sections of equal width, built of 8 by 8-in. or 10 by 10-in. timbers, laid one upon the other, and bolted through from top to bottom. The beams on these boats ran athwartship, rested on sides and bulkheads, and ranged from 6 by 10-in. to 10 by 12-in., spaced 2 ft. apart, and dressed to give a convex surface to the deck, which was usually 3 in., in some cases 4 in., in thickness, and made up of narrow plank from 4 to 6 in. in width. [Illustration: Fig. 11. DIAGRAM OF DECK SHOWIN
PREV.   NEXT  
|<   49   50   51   52   53   54   55   56   57   58   59   >>  



Top keywords:
framed
 

timbers

 

joints

 

trusses

 
intermediate
 

bottom

 
rested
 

convex


athwartship
 
bolted
 

bulkheads

 

running

 

surface

 

service

 

general

 
similar

sections
 

longitudinal

 

practically

 
divide
 

bulkheaded

 

Illustration

 

narrow

 

SHOWIN


DIAGRAM

 

thickness

 

ranged

 

spaced

 
dressed
 
spiked
 

Passaic

 
classes

bottomed

 

ranging

 

scarfed

 

Island

 

harbor

 
Governors
 

varying

 
trussed

bulkhead

 

dapped