o pieces of this
length and sew them together until the shawl is of the desired width, or
the web may simply be turned at the end of each row, then proceed with
the sewing.

The fringe for the ends is made by cutting the yarn into lengths twice
as long as the desired length of the fringe--that is, if the fringe is
to be five inches long, cut the yarn into pieces ten inches long.

Fold each ten-inch piece in two, slip the folded end through a stitch in
the end of the shawl and draw the two ends of the piece through the loop
thus formed and pull tight.

[Illustration]

Doll's Carriage Robe

This robe is ten inches wide and eighteen inches long, and is made of
four pieces of flat web, each piece three yards long. Any number of
pieces of either round or flat web may be used, and the robe made wider
and longer if desired.

Measure fifteen inches of web and turn it. Begin sewing from this, turn
down to the end of the fifteen inches and again turn, bringing the web
around over the end. Care must be taken while turning to keep the ends
perfectly flat.

When the three yards are used begin the other parts in the same way.
Make four or any desired number of parts, and sew them together,
alternating the colors. Put a tassel made of the same material on the
rounded end of each part.

If round web is used it will require more for each part, for the round
is not as wide as the flat web.

[Illustration]

Child's Leggings

Leggings may be made of round or flat web. Measure five inches above the
knee down to the vamp of the shoe for the length of the front part of
the legging. This gives the length of the first row.

Turn the web and begin to sew from this point up to the top, then turn
again and sew down to the toe. Continue in this way until the front part
is two and one-half inches wide.

Bring the remaining rows down to within two inches of the end of the
toe, until the legging is wide enough to go around the child's leg, then
sew to the opposite side of the front. Sew a piece of tape to the
instep.

[Illustration]

Muffler

This may be made of round or flat web. Make the part to go around the
neck first. In this model the neck band is ten inches long and three
inches wide. Sew four rows of flat or six rows of round web for the
neck. Begin three inches from the ends to make the front. Gradually
shorten each row until it is of the desired length.

Make loops of twisted yarn and sew to o