aterial. How should he go to work? How many pieces would you require?

152.--ANOTHER JOINER'S PROBLEM.

[Illustration]

A joiner had two pieces of wood of the shapes and relative proportions
shown in the diagram. He wished to cut them into as few pieces as
possible so that they could be fitted together, without waste, to form a
perfectly square table-top. How should he have done it? There is no
necessity to give measurements, for if the smaller piece (which is half
a square) be made a little too large or a little too small it will not
affect the method of solution.

153--A CUTTING-OUT PUZZLE.

Here is a little cutting-out poser. I take a strip of paper, measuring
five inches by one inch, and, by cutting it into five pieces, the parts
fit together and form a square, as shown in the illustration. Now, it is
quite an interesting puzzle to discover how we can do this in only four
pieces.

[Illustration]

154.--MRS. HOBSON'S HEARTHRUG.

[Illustration]

Mrs. Hobson's boy had an accident when playing with the fire, and burnt
two of the corners of a pretty hearthrug. The damaged corners have been
cut away, and it now has the appearance and proportions shown in my
diagram. How is Mrs. Hobson to cut the rug into the fewest possible
pieces that will fit together and form a perfectly square rug? It will
be seen that the rug is in the proportions 36 x 27 (it does not matter
whether we say inches or yards), and each piece cut away measured 12 and
6 on the outside.

155.--THE PENTAGON AND SQUARE.

I wonder how many of my readers, amongst those who have not given any
close attention to the elements of geometry, could draw a regular
pentagon, or five-sided figure, if they suddenly required to do so. A
regular hexagon, or six-sided figure, is easy enough, for everybody
knows that all you have to do is to describe a circle and then, taking
the radius as the length of one of the sides, mark off the six points
round the circumference. But a pentagon is quite another matter. So, as
my puzzle has to do with the cutting up of a regular pentagon, it will
perhaps be well if I first show my less experienced readers how this
figure is to be correctly drawn. Describe a circle and draw the two
lines H B and D G, in the diagram, through the centre at right angles.
Now find the point A, midway between C and B. Next place the point of
your compasses at A and with the distance A D describe the arc cutting H
B at E. Then place the