FREE BOOKS

Author's List




PREV.   NEXT  
|<   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38  
39   40   41   42   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   >>   >|  
r until the chimney extends above the roof. You can top the chimney by laying a piece of cardboard over the last spool and placing two small spools on it side by side. Enclose the yard with a spool fence; standing the spools a short distance from each other, as in the photograph. Use spools of larger size for the gateway, topping them with two smaller ones (Fig. 62). [Illustration: FIG. 56--First row of spools.] [Illustration: FIG. 57--Second row of spools.] [Illustration: FIG. 58--Third row of spools.] [Illustration: FIG. 59--Fourth row of spools.] [Illustration: FIG. 60--Fifth row of spools.] [Illustration: FIG. 61--A piece of pasteboard on top.] [Illustration: FIG. 62--Place the roof on top.] [Illustration: FIG. 63--Trees and flowers made of paper and spools.] Make the yard into a cheerful =Sunshiny Garden= (Fig. 63), with flowers and trees of paper and tubs and flower-pots of spools, where the clothespin people may go for recreation. The trees are easy to make and are very effective; they are simply fringed strips of paper rolled like a paper lighter with the large ends stuck into spools. Cut a strip of green tissue-paper fifteen inches long and five wide; then cut one-third of the strip narrow, about one inch wide, and fringe the remaining two thirds (Fig. 64). With the thumb and first finger of your right hand begin to roll the corner as shown at A (Fig. 64). Continue rolling, and the fringe, which forms the foliage, will stand out on the outside of the rolled part or trunk of the tree. When you reach the solid, narrow part of the paper strip it will roll into a smooth, round stick, forming the lower part of the tree trunk. Paste the last wrapped corner of the paper roll in place and clip the tree trunk off even across the bottom edge; then press it into a hole in the centre of an empty spool of ordinary size, and there's your tree! You can vary the foliage by crimping the fringe with knife or scissors before the strip is rolled into a tree and by having the fringe of some much longer than that of others. If you use different tones, tints, and shades of green, running from very light to dark, and make a lot of them varying in height, the trees will look very pretty and they can form a jungle where toy wild animals can live; or a number of the trees might form a playground or a grove where dolls may go for a picnic. [Illustration: FIG. 64--This is the way to make a tree.] In the phot
PREV.   NEXT  
|<   14   15   16   17   18   19   20   21   22   23   24   25   26   27   28   29   30   31   32   33   34   35   36   37   38  
39   40   41   42   43   44   45   46   47   48   49   50   51   52   53   54   55   56   57   58   59   60   61   62   63   >>   >|  



Top keywords:

spools

 
Illustration
 

fringe

 
rolled
 

corner

 

flowers

 
foliage
 

chimney

 

narrow

 

bottom


forming

 
smooth
 

wrapped

 

pretty

 

jungle

 

height

 

varying

 
animals
 

picnic

 

number


playground

 

running

 

shades

 

crimping

 

scissors

 
ordinary
 
rolling
 

longer

 
centre
 

tissue


Second
 

topping

 

smaller

 

Fourth

 
pasteboard
 

gateway

 

larger

 

cardboard

 
placing
 

laying


extends

 
Enclose
 

photograph

 

distance

 

standing

 
cheerful
 

Sunshiny

 
remaining
 

fifteen

 

inches