s that might be used
in the same occupation. Although there were more than 200 distinct types
of small sailing craft employed in North American fisheries and in
along-shore occupations during the last 60 years of the 19th century,
only rarely was one of these boat types found to be so well suited to a
particular occupation that its use spread to areas at any great distance
from the original locale.

Those craft that were "production-built," generally rowing boats, were
sold along the coast or inland for a variety of uses, of course. The New
England dory, the seine boat, the Connecticut drag boat, and the yawl
were such production-built boats.

In general, flat-bottomed rowing and sailing craft were the most widely
used of the North American boat types. The flat-bottomed hull appeared
in two basic forms: the scow, or punt, and the "flatiron," or
sharp-bowed skiff. Most scows were box-shaped with raking or curved ends
in profile; punts had their sides curved fore and aft in plan and
usually had curved ends in profile. The rigs on scows varied with the
size of the boat. A small scow might have a one-mast or two-mast
spritsail rig, or might be gaff rigged; a large scow might be sloop
rigged or schooner rigged. Flatiron skiffs were sharp-bowed, usually
with square, raked transom stern, and their rigs varied according to
their size and to suit the occupation in which they were employed. Many
were sloop rigged with gaff mainsails; others were two-mast, two-sail
boats, usually with leg-of-mutton sails, although occasionally some
other kind of sail was used. If a skiff had a two-mast rig, it was
commonly called a "sharpie"; a sloop-rigged skiff often was known as a
"flattie." Both scows and flat-bottomed skiffs existed in Colonial
times, and both probably originated in Europe. Their simple design
permitted construction with relatively little waste of materials and
labor.

Owing to the extreme simplicity of the majority of scow types, it is
usually impossible to determine whether scows used in different areas
were directly related in design and construction. Occasionally, however,
a definite relationship between scow types may be assumed because of
certain marked similarities in fitting and construction details. The
same occasion for doubt exists with regard to the relationships of
sharp-bowed skiffs of different areas, with one exception--the large,
flat-bottomed sailing skiff known as the "sharpie."

The New Haven Sh