al turning, simple example of 6

Davis turret lathe, turning bevel gear blanks 212
turning worm-gear blanks 211
Depth of cut for turning, average 75
Detrick & Harvey horizontal boring machine, floor type 294
Dial for "catching threads" when screw cutting 141
Dial gage, testing concentricity of button with 103, 104
Die and tap holders, releasing 199
Die-heads, self-opening type 200
Disk gage, for angles and tapers 97
rules for setting 98, 99
Dogs or drivers, lathe, application of 16
Drill, flat, for lathe 44
Drilling and reaming in lathe 43
Drivers or dogs, lathe, application of 16
Driving fits, allowances for 131

Eccentric turning in lathe 106
Engine lathe, general description 1
Errors, accumulation of 105, 106

Faceplate, indexing for multiple-thread cutting 153
lathe, application of angle-plate to 48
lathe, holding work on 45
Facing ends of centered stock, different methods 34
Feed and depth of cut for turning, average 75
Feeds and speeds for turning based on Taylor's experiments 71
Filing and polishing in lathe 13
Finishing and roughing cuts in lathe 75, 76
Fits, allowances for different classes 131
different classes used in machine construction 129
driving, allowances for 131
forced, allowances for given pressure 133
forced, average allowance for 130
forced, pressure for 132
push, allowances for 131
running, allowances for 131
shrinkage, allow