at some time blown out with some fire in
firebox. Now, any one of these things, repeated a few times, will make
the best of them leak. You have been advised already not to do these
things, and if you do them, or any one of them, I want to know what
better word there is to express it than "carelessness."

There are other things that will make your flues leak. Pumping cold
water into a boiler with a low gauge of water will do it, if it does
nothing more serious. Pouring cold water into a hot boiler will do it.
For instance, if for any reason you should blow out your boiler while in
the field, and as you might be in a hurry to get to work, you would not
let the iron cool, before beginning to refill. I have seen an engineer
pour water into a boiler as soon as the escaping steam would admit it.
The flues cannot stand such treatment, as they are thinner than the
shell or flue sheet, and therefore cool much quicker, and in contracting
are drawn from the flue sheet, and as a matter of course must leak. A
flue, when once started to leak, seldom stops without being set up, and
one leaky flue will start others, and what are you going to do about it?
Are you going to send to a boiler shop and get a boilermaker to come out
and fix them and pay him from forty to sixty cents an hour for doing it?
I don't know but that you must the first time, but if you are going to
make a business of making your flues leak, you had best learn how to do
it yourself. You can do it if you are not too big to get into the fire
door. You should provide yourself with a flue expander and a calking
tool, with a machinist's hammer, (not too heavy). Take into the firebox
with you a piece of clean waste with which you will wipe off the ends of
the flues and flue sheet to remove any soot or ashes that may have
collected around them. After this is done you will force the expander
into the flues driving it well up, in order to bring the shoulder of
expander up snug against the head of the flue. Then drive the tapering
pin into the expander. By driving the pin in too far you may spread the
flue sufficient to crack it or you are more liable, by expanding too
hard, to spread the hole in flue sheet and thereby loosen other flues.
You must be careful about this. When you think you have expanded
sufficient, hit the pin a side blow in order to loosen it, and turn the
expander about one-quarter of a turn, and drive it up as before; loosen
up and continue to turn