FREE BOOKS

Author's List




PREV.   NEXT  
|<   336   337   338   339   340   341   342   343   344   345   346   347   348   349   350   351   352   353   354   355   356   357   358   359   360  
361   362   363   364   365   366   367   368   369   370   371   372   373   374   375   376   377   378   379   380   381   382   383   384   385   >>   >|  
ut it to make it solid. Concrete is much better if it can be secured. To make the swivel you will need two 1/4 by 5 by 8-in. plates, rounded at the top as shown, and two wood blocks, A and B, each 3-1/2 by 5 by 10 in. Drill the lower ends of the plates for four 2-1/2-in. lag screws and the upper ends for a 5/8-in. bolt. Fasten the plates to the block B, then drill a 3/4-in. hole as shown and fasten the two remaining washers to the block, one on each side and central with the hole. Bore a 5/8-in. hole lengthwise through the block A for the 5/8-in. rocker bolt. This bolt should be 11-1/2 in. long. The teeter board is made of a 2 by 12-in. plank about 12 ft. long. It should be slightly tapered from the center to the ends. Two styles of hand holds are shown, but the one on the left is the one most generally used. The handles are rounded at the ends and are fastened to the board with lag screws or bolts. The block A is fastened to the board with lag screws and should be a working fit between the wo plates where it is held by means of the 5/8-in. bolt. The center pin is 3/4-in. in diameter and about 9 in. long. --Contributed by W. H. Dreier, Jr., Camden, N. J. ** Home-Made Pot Covers [297] Empty thread spools and the tins used as extra inside covers in lard cans are usually thrown away, but these can be put to good use as kettle covers, if they are made up as follows: Saw the spool in half as shown, make a hole in the center of the tin and run a screw or nail through the spool and the tin; then flatten its end on the under side. This will make an excellent cover for a pot. --Contributed by Maurice Baudier, New Orleans, La. [Illustration: Pot Covers] ** An Outdoor Gymnasium Part I-The Horizontal Bar [298] Gymnastic apparatus costs money and needs to be housed, because it will not stand the weather. Gymnasiums are not always available for the average boy who likes exercise and who would like to learn the tricks on horizontal and parallel bars, horse and rings, which all young athletes are taught in regular gymnastic courses. Any small crowd of boys--even two--having a few simple tools, a will to use them and the small amount of money required to buy the necessary [Illustration: Adjustable Horizontal Bar wood, bolts and rope, can make a first class gymnasium. If trees are convenient, and some one can swing an axe, the money outlay will be almost nothing. The following plans are for material purc
PREV.   NEXT  
|<   336   337   338   339   340   341   342   343   344   345   346   347   348   349   350   351   352   353   354   355   356   357   358   359   360  
361   362   363   364   365   366   367   368   369   370   371   372   373   374   375   376   377   378   379   380   381   382   383   384   385   >>   >|  



Top keywords:

plates

 

center

 
screws
 

rounded

 
covers
 

Covers

 

Horizontal

 

Illustration

 

fastened

 

Contributed


exercise

 
average
 

Gymnasiums

 

weather

 
Gymnasium
 
Outdoor
 
Baudier
 

Maurice

 

Orleans

 
excellent

Gymnastic
 

apparatus

 

housed

 

gymnasium

 
Adjustable
 
amount
 

required

 

convenient

 

material

 

outlay


athletes
 

tricks

 

horizontal

 

parallel

 

taught

 

regular

 

simple

 

gymnastic

 

courses

 
teeter

rocker

 
central
 
lengthwise
 

slightly

 

tapered

 
generally
 

handles

 
styles
 

washers

 
remaining